用于?600mm光学元件；±4°-精确调整和360°粗旋转。负载高达150公斤！接近零的反冲。高的热稳定性和振动稳定性。
8MLAOM-超大尺寸电动光学调整架
8MLAOM电动万向架光学支架设计用于定位最大600 mm的大型光学元件。LAOM光学安装座通常应用在高功率激光系统和天文学。
如果两个坐标的传输都不耦合，则LAOM系列光学安装座可在方位角和仰角上完成360度旋转。特殊的弹簧预紧内部机构产生接近零的反冲运动，这使用户可以避免使用附加的反馈系统，从而减少了系统的不确定性。在±4°范围内的微调可提供高质量的运动，分辨率低至3弧秒（或根据要求更好）。
时效硬化铝合金保证：组件的柔软性，高的热稳定性和高的振动稳定性。
- 旋转范围方位角和仰角：360°/360°
- 精调范围：±4°/4°
- 位置精度高：3?arcsec
- 光学元件最大厚度：100mm
- 光学元件最大重量150kg
- 高热稳定性、高振动稳定性
- 近零回旋
- 口径大小可定制
- 手动调节版本可选
- 真空版本可选
| Kinematics and Feedback information | |
| Azimuth/Elevation (coarse) | 360°/360° |
| Azimuth/Elevation (fine) | ±4°/±4° |
| Resolution | |
| ???4000 steps/rev | 0.3 arcsec |
| ???1000 steps/rev | 1.2 arcsec |
| ???400 steps/rev | 3 arcsec |
| Encoder type | On request |
| Encoder resolution | On request |
| Bidirectional repeatability | 3 arcsec |
| Unidirectional repeatability | 3 arcsec |
| Accuracy | On request |
| Backlash | 0 |
| Maximum speed | 1 °/sec |
| Limit Switches | Hall sensors(2pcs on each axis) |
| Switch polarity | Pushed is closed |
| Load and Transmission information | |
| Load capacity | 150 kg |
| Lead Screw Pitch | 1 mm |
| Stepper Motor | 5909 |
| DC motor | On request |
| Gearbox | On request |
| Material and environment conditions | |
| Base material | Aluminum |
| Finish | Powder coating |
| Environment pressure | Atmosphere (10-3?torr / 10-6?on request) |
| Ambient temperature | On request |
| Control and Communication | |
| Recommended controllers | 8SMC5-USB-B9-2 |
| Recommended power supply | PS36-4.4-4 / PS24-2.5-4 |
| Connector | HDB15(M) |
| Cable length | 1.6 m |
| Additional Details | |
| Measurement system | Metric |
| Weight | 79 kg |
| Aperture | ?590 mm |
| Max optic diameter | ?600 mm |
| Min optic diameter | ?500 mm |
| Max optic thickness | 100 mm |
Related products
Reviews
There are no reviews yet.