BeamOn WSR-激光光束分析仪

Home/Duma, 激光光斑分析仪, 激光测试仪器/BeamOn WSR-激光光束分析仪

BeamOn WSR-激光光束分析仪







Parameters Value
Camera type WSR Wide Spectral Range CCD,1/2″format
Sensor active area 6.47mm wide ×4.83mm high
Pixel size 8.6um(H)×8.3um(V)
Dimensions 80mm×78.5mm×49mm
CCD focal position 17.7mm between sensor and filter in filter wheel
Spectral response BeemOn UV-NIR??? 190~1600nm
BeamOn Vis-NIR?? 350~1600nm
Weight 400 gr.with cable
Power consumption 5V/0.6A through USB 2.0port
Accessories included one IR-Edge filter.(removable).
Equipped with a built-in filter wheel,with 4×ND 2mm thick filters.
One×8/32 threaded mouting hole,one post.
Dynamic range Up to 1015?using all filters and software controller ellctronic shutter and gain
Shutter speed 1/50×256sec to 1/100000 sec,17 steps manually,or automatic
Software controlled gain 6dB to 41dB,2dB steps manually,or automatic.
Maximum frame rate 25Hz,excluding slow shutter operation
Sensitivity 2.9 pW/mm2@633nm(shutter 1/50,gain 40dB)
29uW/mm2@1310nm(with hood,IR Edge filter,shutter 1/50,gain 40dB)
1mW/mm2@1550nm(with hood,IR Edge filter,shutter 1/50×32,gain 40dB)
Down to 3uW/mm2 with shutter 1/50×256
Saturation intensity 1mW/cm2?at 633nm with no filter installed
Damage threshold 50W/cm2?or 1J/cm2 with all filters installed
Null Null function is avaliable to automatically substract backgroud
Operation with pulse lasers Abillty to capture and replay image from slowly pulsing laser(1~100Hz)while filtering out frames with no laser pulse.Gain control and external filter make it easy to abtain optimal intensity
Triggering In pulsed mode set threshold by slide bar to display frames with capture pulses
Image resolution 720×576


There are no reviews yet.

Be the first to review “BeamOn WSR-激光光束分析仪”

Your email address will not be published. Required fields are marked *

Go to Top
XML 地图 | Sitemap 地图